Drilling holes through tiles to fit roller blinds.

We use a tile cutter to make a start mark before drilling through tiles when fitting roller blinds. I hav’nt broken a tile for years!

Placing the roller blind bracket in position on the tiles.

Placing the roller blind bracket in position on the tiles.

Tile cutter marking hole before drilling through tiles.

Tile cutter marking hole before drilling through tiles.

www.baileysblinds.com.

About blindman

Blind fitter living in Suffolk
This entry was posted in Fitting, Roller Blinds. Bookmark the permalink.

2 Responses to Drilling holes through tiles to fit roller blinds.

  1. Aspen says:

    At last! Someone with the insight to solve the plrboem!

  2. blindman says:

    Thanks for commenting!
    I never liked the idea of marking the hole and drilling through masking tape.
    The tile cutter provides a more positive start to the hole. It is still possible for the drill bit to slide when using masking tape.
    Just be careful and never use the hammer action on your drill when drilling through the tiles.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>